0-10V Differential Pressure Gauge Measure Fan And Blower Pressure

MC2000/5000 series differential pressure gauge

MC2000/5000 Differential pressure gauges are widely used to measure fan and blower pressure, filter resistance, wind speed, furnace pressure, orifice differential pressure, bubble level and liquid amplifier or hydraulic system pressure, as well as air gas ratio control and automatic valve control during combustion, as well as blood pressure and respiratory pressure detection in healthcare equipment.

MC2000 series model parameters

Application industries:

Medical industry, microelectronics, aerospace, environmental protection engineering, biological engineering, pharmaceutical, building intelligence, HVAC, food and beverage, precision electronic processing, etc.

Product features:

1.Practical patented products

2.OEM manufacturer

3.The magnetic worm mechanism fundamentally eliminates the friction caused by the gear drive.

4.There is no need to fill the meter with liquid.

5.Pointer motion without inertia and drift.

6.There is essentially no lag.

7.Excellent anti-vibration and anti-jitter performance.

8.Positive, negative or differential pressure can be measured.

9.81 ranges, minimum 0-30Pa, maximum 0-30KPa.

10.2 sets of pressure interfaces (side and back) +3 mounting methods = Free and flexible application

About:

2000 series mechanical differential pressure gauge is a simple, frictionless spiral magnet movement, with rubber diaphragm as a sensitive element to measure the elastic pressure gauge, the table does not need to fill liquid, no inertia, no drift pointer movement. There is essentially no lag. It has good anti-vibration and anti-jitter performance. Use a pointer to quickly indicate the micropressure (positive, negative, or differential) of the air or non-corrosive gas under test.

Technical parameter

Medium: Air and non-flammable, compatible gases (natural gas optional)

Housing: cast aluminum housing or ABS housing, plexiglass beveled panel. Dark gray coating resistant to 168 hours salt spray test

Accuracy: 2%F.S (mm and pa range units correspond to it)

Withstand pressure range: -20Hg.to 15 psig (-0.677 bar to 1.034 bar)

Temperature range: 20 to 140°F (-6.67 to 60°C)

Opening size: 114mm

Installation positioning: Diaphragm for vertical orientation

Weight: 500g/ piece

Standard accessories: Two 1/8"NPT threaded connections for high and low pressure connections and for rubber hose connection; Two 1/8"NPT plugs for blocking the remaining two high and low pressure ports; Three threaded countersunk mounting fittings.